Hyundai Venue (QX): Cylinder Block / Crankshaft. Components and components location
| Components |
| 1. Piston ring (#1) 2. Piston ring (#2) 3. Oil ring 4. Piston 5. Piston pin |
6. Connecting rod 7. Connecting rod upper bearing 8. Connecting rod lower bearing 9. Connecting rod bearing cap |
Disassembly • Use fender covers to avoid damaging painted surfaces.
Disassembly • Use fender covers to avoid damaging painted surfaces.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: In-car Sensor. Description and operation
Description The In-car air temperature sensor is built in the heater & A/C control unit. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to heater control unit and accord
Hyundai Venue (QX) (2020-2026) Service Manual: Mode Control Actuator. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Normal Maintenance Schedule
- Rear Seat Assembly. Repair procedures
- Vehicle Information
- New on site
- Most important about car
