| Specifications |
|
Items |
Blind-Spot Collision Warning (BCW) |
|
Rated voltage |
DC 12V |
|
Operating voltage |
9V - 16V |
|
Operating speed |
30 km/h - 255 km/h |
|
Sensible distance |
70m |
|
Curvature radius |
Start : More than 100m |
|
Stop : Less than 70m |
|
|
Frequency |
24 GHz |
|
Numbers |
2EA |
|
Items |
Rear Cross-Traffic Collision Warning (RCCW) |
|
Rated voltage |
DC 12V |
|
Operating voltage |
9V - 16V |
|
Operating speed |
0 km/h - 10 km/h |
|
Sensible distance |
25m |
|
Curvature radius |
- |
|
Frequency |
24 GHz |
|
Numbers |
2EA |
Diagnosis with Diagnostic tool 1. In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (Diagnostic tool).
Connector and Terminal Function [Connector A] Pin NO Function 1 IGN1 2 L-CAN High 3 C-CAN Low 4 Warning indicator[LH] 5 - 6 L-CAN Low 7 C-CAN High 8 Ground [Connector B] Pin NO Function 1 IGN1 2 L-CAN High 3 C-CAN Low 4 Warning indicator[LH] 5 - 6 L-CAN Low 7 C-CAN High 8 Ground Circuit Diagram
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crashpad lower panel. (Refer to BODY - "Crashpad Lower Panel") 3. Disconnect the SSB connector (A).
Removal 1. Remove the bumper cover. (Refer to Body - "Front Bumper Cover") 2. Disconnect the connector (A) from the PDW sensor. [L - Type] Installation 1.