Hyundai Venue (QX): Cylinder Block / Crankshaft. Components and components location
| Components |
| 1. Crankshaft sprocket 2. Crankshaft thrust bearing 3. Crankshaft upper main bearing 4. Crankshaft |
5. CKPS wheel 6. Crankshaft lower main bearing 7. Crankshaft main bearing cap |
Disassembly • Use fender covers to avoid damaging painted surfaces.
Disassembly • Use fender covers to avoid damaging painted surfaces.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Condenser. Repair procedures
Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2.
Hyundai Venue (QX) (2020-2026) Service Manual: PTC Heater. Repair procedures
Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Warning and Indicator Lights
- Remote Key
- Operating Door Locks from Outside the Vehicle
- New on site
- Most important about car
