| Component |

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crashpad lower panel.
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the crash pad lower panel.
Inspection 1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column. 2. Check for continuity between the terminals. 3.
Component Location 1. Heater unit assembly Compoents 1. Mode control actuator 2. Heater core case 3. Center duct seal 4. PTC heater 5. Heater core assembly 6. Heater case [LH] 7.