Hyundai Venue (QX): ESP(Electronic Stability Program) System / ESP Control Module. Components and components location
| Components |
| 1. Front - right tube 2. Rear - left tube 3. Rear - right tube 4. Front - left tube |
5. MC SEC 6. MC PRI 7. ABS Control module (HECU) 8. Bracket |
Terminal Function Pin No Description Current (AMPS) Resistance (mΩ) Remark 1 POS.
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the battery and battery tray.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Mode Control Actuator. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.
Hyundai Venue (QX) (2020-2026) Service Manual: Blower Resistor (Manual). Repair procedures
Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Operating Door Locks from Outside the Vehicle
- Tire Pressure Monitoring System (TPMS) (Type A)
- Maintenance
- New on site
- Most important about car
