Hyundai Venue (QX): Timing System / Front Oil Seal. Repair procedures

Removal and Installation
1.
Remove the crankshaft damper pulley.
(Refer to Timing System - "Crankshaft Damper Pulley")
2.
Remove the front oil seal.
Hyundai Venue. Front Oil Seal. Repair procedures   
•
Using the SST (09455-21200), reassemble the timing chain cover oil seal (A).

Hyundai Venue. Front Oil Seal. Repair procedures

3.
Installation is reverse order of removal.

    Components 1. Front oil seal

    Components 1. Timing chain cover

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: PTC Heater. Description and operation

    Description The PTC (Positive Temperature Coefficient) heater is installed at the exit or the backside of heater core. The PTC heater is an electric heater using a PTC element as an auxiliary heating device that supplements deficiency of interior heat source in highly effective diesel engine.

    Hyundai Venue (QX) (2020-2026) Service Manual: Rear Corner Radar Unit. Repair procedures

    Removal    lf replacement of the rear corner radar unit bracket or extension wire is required, replace the defective part only with a new one. 1.

    Categories

     
    Copyright © 2026 www.hvenueqx.com - 0.0165