| Replacement |
| 1. |
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
|
| 2. |
Separate the front seat belt buckle wiring (A).
|
| 3. |
Loosen the mounting bolt and remove the front seat belt buckle (B).
|
| 4. |
To install, reverse removal procedure.
|
Component Location 1. Front seat belt buckle
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. Measure the resistance between terminal "+" and "-" of the evaporator temperature sensor.
Removal lf replacement of the rear corner radar unit bracket or extension wire is required, replace the defective part only with a new one. 1.