| Replacement |
| 1. |
Remove the front seat belt upper anchor.
(Refer to Front Seat Belt - "Front Seat Belt Pretensioner")
|
| 2. |
After loosening the mounting bolts, then remove the height adjust (A).
|
| 3. |
To install, reverse removal procedure.
|
Component Location 1. Height adjust
Component Location 1. Front seat belt buckle
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the steering column upper and lower shroud panel.
Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch.