| Component Location |


Component Location [Passenger Compart Relay]
Inspection PCB block 1. Disconnect the negative (-) battery terminal. 2. Pull out the relay from the engine compartment relay block.
Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.
Component Location 1. Heater unit assembly Compoents 1. Mode control actuator 2. Heater core case 3. Center duct seal 4. PTC heater 5. Heater core assembly 6. Heater case [LH] 7.