| Removal |
| 1. |
Disconnect the vapor hose (A).
|
| 2. |
Remove the PCV valve (B).
|
| Inspection |
| 1. |
Insert a thin stick (A) into the PCV valve (B) from the threaded side
to check that the plunger movement.
|
| Installation |
| 1. |
Installation is reverse of removal.
|
Operation Principle
Special Service Tools Tool (Number and name) Illustration Use 09977-3R000 Disc & hub assembly bolt remover Removal and installation of disc & hub assembly.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.