Hyundai Venue (QX): Rear Door / Rear Door Outside Handle. Repair procedures

Replacement
Hyundai Venue. Rear Door Outside Handle. Repair procedures   
When removing with a flat-tip screwdriver or remover,wrap protective tape around the tools to preventdamage to components.
Take care not to scratch the body surface.
1.
Loosen the bolt mounted in the plug hole and remove the rear door outside handle (A) in the direction of the arrow.

Hyundai Venue. Rear Door Outside Handle. Repair procedures

2.
To install, reverse removal procedure.
Hyundai Venue. Rear Door Outside Handle. Repair procedures   
Make sure the door locks / unlocks and opens / closes properly.
Be sure to install the outside handle pad (A) between the outside handle and the door panel.

Hyundai Venue. Rear Door Outside Handle. Repair procedures

    Component Location 1. Rear door outside handle

    Replacement 1. Pull down the front door window glass to the lowest level by pressing the power window glass switch.

    Other information:

    Hyundai Venue (QX) (2020-2025) Service Manual: A/C Pressure Transducer. Repair procedures

    Inspection    • Before measuring the pressure of the refriferant line, check whether the refrigerant amount is charged in accordance with the specified charging amount.

    Hyundai Venue (QX) (2020-2025) Service Manual: Special service tools

    Special Service Tools Tool Name / Number Illustration Description LKA Compensator (09890-3V100) Used for compensating front view camera unit BCW Sensor Correction Tool Set (09958-3T500) Used to correct the blin

    Categories

     
    Copyright © 2025 www.hvenueqx.com - 0.0114