| Component Location |

| 1. Rear seat belt buckle [RH] 2. Rear seat belt buckle [LH] |
3. Rear center seat belt buckle
|
Replacement 1. Remove the rear seat back cover [LH]. (Refer to Rear Seat - "Rear Seat Back Cover") 2.
Replacement 1. Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Cushion Assembly") 2.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.