| Replacement |
| 1. |
Remove the rear seat back cover [LH].
(Refer to Rear Seat - "Rear Seat Back Cover")
|
| 2. |
Loosen the mounting nuts and remove the rear center seat belt retractor
(A).
|
| 3. |
To install, reverse removal procedure.
|
Component Location 1. Rear center seat belt retractor
Component Location 1. Rear seat belt buckle [RH] 2. Rear seat belt buckle [LH] 3. Rear center seat belt buckle
Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2.
Removal 1. Remove the rear bumper cover. (Refer to Body - "Rear Bumper Cover") 2. Loosen the mounting screws and remove the rear view camera. Installation 1.