Hyundai Venue (QX): Rear Seat / Rear Seat Latch. Repair procedures

Hyundai Venue (QX) (2020-2026) Service Manual / Body (Interior and Exterior) / Rear Seat / Rear Seat Latch. Repair procedures

Replacement
Hyundai Venue. Rear Seat Latch. Repair procedures   
•
Put on gloves to prevent hand injuries.
•
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
1.
Remove the rear seat back cover.
(Refer to Rear Seat - "Rear Seat Back Cover")
2.
Remove the rear seat latch rod (A), loosen the mounting bolts and remove the rear seat latch (B).
Tightening torque :
16.7 - 25.5 N.m (1.7 - 2.6 kgf.m, 12.3 - 18.8 lb-ft)

Hyundai Venue. Rear Seat Latch. Repair procedures
3.
To install, reverse the removal procedure.

    Components Location 1. Reat seat latch

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Heater Unit. Components and components location

    Component Location 1. Heater unit assembly Compoents 1. Mode control actuator 2. Heater core case 3. Center duct seal 4. PTC heater 5. Heater core assembly 6. Heater case [LH] 7.

    Hyundai Venue (QX) (2020-2026) Service Manual: Repair procedures

    Variant Coding    When you need variant coding: – Replace Front View Camera with a new one ※ EOL Variant Coding and calibration required for new replacement Front View Camera Variant Coding

    Categories

     
    Copyright © 2026 www.hvenueqx.com - 0.0144