Hyundai Venue (QX): Rear Combination Lamp / Repair procedures

Hyundai Venue (QX) (2020-2026) Service Manual / Body Electrical System / Rear Combination Lamp / Repair procedures

Removal
Outside Combination Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Loose the screws and then remove the outside rear combination lamp (A).

Hyundai Venue. Repair procedures
3.
Replace the turnsignal lamp bulb (A) after turning the bulb socket counterclockwise.

Hyundai Venue. Repair procedures
4.
Disconnect the rear combination lamp connector (A).

Hyundai Venue. Repair procedures
Installation
1.
Install the rear combination lamp assembly after assembling the bulb.
2.
Connecting the lamp connector.
3.
Install the rear combination lamp assembly.

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Repair procedures

    Inspection The following section describes how to diagnose faults using a diagnostic instrument. 1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel, and turn on the GDS.

    Hyundai Venue (QX) (2020-2026) Service Manual: Blower Unit. Components and components location

    Component Location 1. Blower unit assembly Component Location 1. Intake seal 2. Intake upper case 3. Intake actuator 4. Intake door 5. Intake lower case 6. Blower pad 7.

    Categories

     
    Copyright В© 2026 www.hvenueqx.com - 0.0139