| Replacement |
| 1. |
Open the glass fully.
|
| 2. |
Remove the mounting bolt (C), from the frame (B), and then remove the
deflector (A).
|
| 3. |
To install, reverse the removal procedure.
|
Replacement • Put on glove to protect your hands.
Components Location 1. Sunroof assembly
Description The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed.
Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.