| Replacement |
|
| 1. |
Close the sunroof glass completely by pressing the sunroof switch.
|
| 2. |
Loosen the mounting screws (A) and remove the sunroof glass (B).
|
| 3. |
To install, reverse the removal procedure.
|
Components Location 1. Sunroof glass
Replacement 1. Open the glass fully. 2. Remove the mounting bolt (C), from the frame (B), and then remove the deflector (A).
Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer to Body - "Front door trim") 3. Disconnect the power door mirror connector from the harness 4.