Hyundai Venue (QX): Sunroof / Sunroof Sunshade. Repair procedures
| Replacement |
| 1. |
Remove the sunroof assembly.
(Refer to Sunroof - "Sunroof Assembly")
|
| 2. |
Remove the stopper (A) by pushing it in the direction of the arrow.
|
| 3. |
Remove the sunroof sunshade (A) by pushing it backward.
|
| 4. |
To install, reverse the removal procedure.
|
Replacement • When removing with a flat - tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
Replacement 1. Remove the sunroof assembly. (Refer to Sunroof - "Sunroof Assembly") 2.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Evaporator Temperature Sensor. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. Measure the resistance between terminal "+" and "-" of the evaporator temperature sensor.
Hyundai Venue (QX) (2020-2026) Service Manual: Temperature Control Actuator. Description and operation
Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Warning and Indicator Lights
- Lighting control
- Operating Door Locks from Outside the Vehicle
- New on site
- Most important about car
