| Component Location |

| 1. Sunvisor |
2. Retainer |
Components (1) [General Type] 1. Sunvisor 2. Assist handle bracket 3. Roof trim [Sunroof Type] 1.
Replacement • Put on gloves to prevent hand injuries.
Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2.
Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch.