Hyundai Venue (QX): Cruise Control / To increase/decrease Cruise Control speed

Hyundai Venue (QX) (2020-2026) Owners Manual / While Driving / Cruise Control / To increase/decrease Cruise Control speed

To increase Cruise Control speed

Hyundai Venue. To increase/decrease Cruise Control speed

  • Push the toggle switch up (RES+) and hold it, while monitoring the SET speed on the instrument cluster. The set speed will increase by 5 MPH (8 km/h) increments. Release the toggle switch when the desired speed is shown and the vehicle will accelerate to that speed.
  • Push the toggle switch up (RES+) and release it immediately. The cruising speed will increase 1.0 MPH (1.6 km/h) each time the toggle switch is operated in this manner.
  • Depress the accelerator pedal. When the vehicle attains the desired speed, push the toggle switch down (SET-).

To decrease Cruise Control speed

Hyundai Venue. To increase/decrease Cruise Control speed

  • Push the toggle switch down (SET-) and hold it.Your vehicle will gradually slow down. Release the toggle switch at the speed you want to maintain.
  • Push the toggle switch down (SET-) and release it immediately. The cruising speed will decrease 1.0 MPH (1.6 km/h) each time the toggle switch is operated in this manner.
  • Lightly tap the brake pedal. When the vehicle attains the desired speed, push the toggle switch down (SET-).

    1. Press the CRUISE button on the steering wheel to turn the system on. The cruise indicator will illuminate. 2. Accelerate to the desired speed, which must be more than 20 MPH (30 km/h).

    To temporarily accelerate with the Cruise Control ON Depress the accelerator pedal. When you take your foot off the accelerator, the vehicle will return to the previously set speed.

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Head Lamp Leveling Switch. Repair procedures

    Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel (A). (Refer to Body - "Crash Pad Lower Panel") 3. Remove the crash pad lower switch (A).

    Hyundai Venue (QX) (2020-2026) Service Manual: Special service tools

    Special Service Tools Tool (Number and name) Illustration Use 09977-3R000 Disc & hub assembly bolt remover Removal and installation of disc & hub assembly.

    Categories

     
    Copyright В© 2026 www.hvenueqx.com - 0.0189