Hyundai Venue (QX): Hydraulic System / Valve Body. Components and components location
| Components Location |
| 1. Solenoid valve support bracket 2. Solenoid valve support bracket (Directly solenoid) 3. Line Pressure Control Solenoid Valve 4. Torque Convert Control Solenoid Valve (T/CON) 5. ON/OFF solenoid valve 6. Overdrive Clutch Control Solenoid Valve (OD/C) |
7. Underdrive Brake Control Solenoid
Valve (UD/B) 8. 35R Clutch Control Solenoid Valve (35R/C) 9. 26 Brake Control Solenoid Valve (26B) 10. LR/B pressure flow hole 11. UD/B pressure flow hole 12. Accumulator |
Description The valve body is essential to automatic transaxle control and consists of various valves used to control the oil feed from the oil pump.
Replacement • If necessary replace the valve body, hydraulic adjustment is needed, replace the automatic transaxle assembly.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Antenna Coil. Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the steering column upper and lower shroud panel.
Hyundai Venue (QX) (2020-2026) Service Manual: Description and operation
Description Rear Corner Radar is a system that measures the relative speed and distance from the following vehicles by using two electromagnetic wave radar sensors attached to the rear bumper, and detects any vehicle within the blind spot zone and gives off alarm.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Emission Control System
- Engine Mechanical System
- Repair procedures
- New on site
- Most important about car
