Hyundai Venue (QX): Hydraulic System / Valve Body. Repair procedures

Hyundai Venue (QX) (2020-2026) Service Manual / Automatic Transaxle System\ / Hydraulic System / Valve Body. Repair procedures

Replacement
Hyundai Venue. Valve Body. Repair procedures   
•
If necessary replace the valve body, hydraulic adjustment is needed, replace the automatic transaxle assembly.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
•
After the automatic transaxle assembly exchange, input the hydraulic calibration information use a diagnostic tool.

    Components Location 1. Solenoid valve support bracket 2. Solenoid valve support bracket (Directly solenoid) 3. Line Pressure Control Solenoid Valve 4.

    Description • Torque converter control solenoid valve (T/CON_VFS) is attached to the valve body. • This variable force solenoid valve indirectly controls the hydraulic pressure inside the torque converter.

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: PTC Heater. Repair procedures

    Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch.

    Hyundai Venue (QX) (2020-2026) Service Manual: Repair procedures

    Removal 1. Remove the rear bumper cover. (Refer to Body - "Rear Bumper Cover") 2. Loosen the mounting screws and remove the rear view camera. Installation 1.

    Categories

     
    Copyright © 2026 www.hvenueqx.com - 0.0734