Removal 1. Set shift lever to N position. 2. Turn OFF ignition switch and disconnect the negative (-) battery cable.
Specifications Item Specifications Transaxle type A6GF1 - 2 Engine type Gasoline 1.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.
Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.