Hyundai Venue: Sunroof / Sunroof Assembly. Components and components location
Replacement
1.
Open the glass fully.
2.
Remove the mounting bolt (C), from the frame (B), and then remove the
deflector (A)...
Replacement
•
When removing with a flat - tip screwdriver or remover, wrap
protective tape around the tools to prevent damage to components...
Other information:
Inspection
1.
With the washer motor connected to the reservoir tank, fill the reservoir
tank with water.
Before filling the reservoir tank with water, check the filter
for foreign material or contamination...
The ignition switch must be in the ON position to be able to raise or lower the
windows. Each door has a Power Window switch to control that door’s window. The
driver has a Power Window Lock switch which can block the operation of passenger
windows...
Categories
WARNING
To reduce the risk of an air bag deploying unexpectedly and causing serious
injury or death:
Do not hit or allow any objects to impact the locations where air bags
or sensors are installed.
Do not perform maintenance on or around the air bag sensors. If the location
or angle of the sensors is altered, the air bags may deploy when they should
not or may not deploy when they should.
Do not install bumper guards or replace the bumper with a nongenuine
HYUNDAI parts. This may adversely affect the collision and air bag deployment
performance.
Place the ignition switch in the LOCK/OFF or ACC position when the vehicle
is being towed to prevent inadvertent air bag deployment.
Have all air bag repairs conducted by an authorized HYUNDAI dealer.
read more