Hyundai Venue: Horn / Components and components location

1. Horn switch
2. Horn relay
|
3. Horn
4. Clock spring
|
Removal
1.
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
2.
Disconnect the multifunction switch connector and then remove the low
horn (A)...
Other information:
Inspection
In the state of IGN1 ON, when the multi function switch module detects auto
light switch on, tail lamp relay output and head lamp low relay output are controlled
according to auto light sensor's input.
If IGN1 ON, The BCM monitors the range of this supply and raises up a failure
as soon as the supply’s voltage is out of range...
Replacement
•
Put on gloves to prevent hand injuries.
•
When removing with a flat-tip screwdriver or remover, wrap protective
tape around the tools to prevent damage to components...
Categories

Your HYUNDAI uses a Smart Key, which you can use to lock or unlock the driver
and passenger doors or the rear liftgate.
1. Door Lock
2. Door Unlock
3. Remote start
read more