Hyundai Venue: Fender / Components and components location

Replacement
•
When removing the fender, wrap protective tape around a screwdriver
or remover not to damage components
•
Put on gloves to prevent hand injuries
•
When removing the clips, use a clip remover...
Other information:
Replacement
1.
Open the fuel filler cap (A)
2.
Loosen the mounting bolts and remove the fuel filler door (A).
3.
To install, reverse removal procedure.
•
Make sure the fuel filler door locks/unlocks and opens/closes
properly...
Type A
Type B
[Type A]
1. Remove the lamp assembly from the vehicle by prying the lens and pulling the
assembly out.
2. Disconnect the bulb electrical connector.
3. Separate the socket and the lens parts by turning the socket counterclockwise
until the tabs on the socket align with the slots on the lens part...
Categories

1. Instrument cluster
2. Horn
3. Key ignition switch/ Engine Start/Stop button
4. Infotainment system
5. Hazard warning flasher switch
read more