Hyundai Venue: Windshield Glass / Components and components location
Hyundai Venue (QX) (2020-2024) Service Manual / Body (Interior and Exterior) / Windshield Glass / Components and components location
| Component Location |
| 1. Windshield glass |
Repair procedures
Replacement
[Removal]
•
Put on gloves to prevent hand injuries...
Other information:
Hyundai Venue (QX) (2020-2024) Service Manual: Floor Console Assembly. Repair procedures
Replacement • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...
Hyundai Venue (QX) (2020-2024) Service Manual: Shift Cable. Repair procedures
Removal 1. Turn OFF ignition switch and then diconnect the battery negative (-) cable. 2. Remove the air cleaner and air duct. (1) Remove the air duct (A)...
Categories
- Manuals Home
- 1st Generation Venue Owners Manual
- 1st Generation Venue Service Manual
- Lighting control
- Automatic Door Lock and Unlock Features
- System Setting and Activation
- New on site
- Most important about car
Air bag collision sensors
WARNING
To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:
Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Do not install bumper guards or replace the bumper with a nongenuine HYUNDAI parts. This may adversely affect the collision and air bag deployment performance. Place the ignition switch in the LOCK/OFF or ACC position when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs conducted by an authorized HYUNDAI dealer.
Copyright © 2024 www.hvenueqx.com