Hyundai Venue: Cylinder Head Assembly / CVVT & Camshaft. Components and components location

1. Exhaust camshaft
2. Intake camshaft
3. Exhaust CVVT
4. Intake CVVT
|
5. Camshaft bearing cap
6. Camshaft front bearing cap
7. O-ring
8. OCV (Oil Control Valve) adapter
|
Removal
1.
Remove the engine cover.
(Refer to Engine and Transaxle Assembly - "Engine Cover")
2...
Components
1. Cylinder
head assembly
2. Mechanical Lash Adjuster (MLA)
3. Retainer lock
4. Retainer
5. Valve stem seal
6...
Other information:
Inspection
[On vehicle inspection]
1.
Accelerate the engine to about 3,000 rpm 3 times or more.
2.
Remove the spark plug.
3.
Check the spark plug visually...
General Service Information
Protection of the Vehicle
Always be sure to cover fenders, seats, and floor areas prior to beginning work.
•
The support rod must be inserted into the hole near the edge
of the hood whenever you inspect the engine compartment to prevent
the hood from falling and causing possible injury...
Categories

This warning light informs the driver the following situations.
-- Forward Collision-Avoidance Assist system malfunction (if equipped)
-- Forward Collision-Avoidance Assist radar blocked (if equipped)
-- Blind-Spot Collision Warning system malfunction (if equipped)
-- Blind-Spot Collision Warning radar blocked (if equipped)
-- Lamp malfunction (if equipped)
-- High Beam Assist malfunction (if equipped)
-- Tire Pressure Monitoring System (TPMS) malfunction (if equipped)
read more