Hyundai Venue: Engine Mechanical System / Cylinder Head Assembly
Hyundai Venue (QX) (2020-2025) Service Manual / Engine Mechanical System / Cylinder Head Assembly
- Repair procedures
- Components and components location
- Cylinder Head Cover. Components and components location
- Cylinder Head Cover. Repair procedures
- CVVT & Camshaft. Components and components location
- Cylinder Head. Components and components location
- Cylinder Head. Repair procedures
Timing Chain. Repair procedures
Removal
1.
Turn the crankshaft pulley clockwise, and align its groove with the
timing mark of the timing chain cover...
Repair procedures
Adjustment
Valve Clearance Inspection and Adjustment
•
Inspect and adjust the valve clearance when the engine is cold
(Engine coolant temperature : 20°C) and cylinder head is installed
on the cylinder block...
Other information:
Hyundai Venue (QX) (2020-2025) Service Manual: Repair procedures
Adjustment TCM Learning 1. Overview and purpose of learning 1) The purpose is to ensure the initial operation safety by correcting the oil pressure differences between transmissions...
Hyundai Venue (QX) (2020-2025) Service Manual: Driver Airbag (DAB) Module and Clock Spring. Description and operation
Description • Driver Air Bag (DAB) DAB is installed in the steering wheel, and electrically connected to the SRSCM via clock spring. It is deployed during frontal impact to protect the driver. • Clock Spring Clock spring delivers actuation signal, generated by the sensors installed in the front and right/left sides of a vehicle, to the inflator (gas generator) of the driver air bag module via internal cable...
Categories
- Manuals Home
- 1st Generation Venue Owners Manual
- 1st Generation Venue Service Manual
- Immobilizer System
- Operating Door Locks from Outside the Vehicle
- Trip Computer
- New on site
- Most important about car
Air bag collision sensors
WARNING
To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:
Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Do not install bumper guards or replace the bumper with a nongenuine HYUNDAI parts. This may adversely affect the collision and air bag deployment performance. Place the ignition switch in the LOCK/OFF or ACC position when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs conducted by an authorized HYUNDAI dealer.
Copyright © 2025 www.hvenueqx.com