Hyundai Venue: While Driving / Driver Attention Warning (DAW)
Hyundai Venue (QX) (2020-2023) Owners Manual / While Driving / Driver Attention Warning (DAW)
Driver Attention Warning System is designed as a safety feature to help reduce drowsy or inattentive driving. DAW displays a bar graph that is intended to represent the driver's attention and fatigue while driving.
- System Setting and Activation
- Resetting the System. System Standby
- System Malfunction
- Leading vehicle departure alert
LKA system Function Change
The driver can change LKA to Lane Departure Warning system or change LKA system
mode between Standard LKA and Active LKA from the LCD display. Go to the 'User Settings
→ Driver Assistance → Active Lane Keeping Assist/Lane Keeping Assist/Lane Departure
Warning...
System Setting and Activation
System setting
Driver Attention Warning system is set to be on, when your vehicle is first
delivered to you from the factory.
To turn ON Driver Attention Warning system, turn on the engine, and then
select 'User Settings → Driver Assistance → Driver Attention Warning → Inattentive
Driving Warning’ on the LCD display...
Other information:
Hyundai Venue (QX) (2020-2023) Service Manual: Schematic diagrams
Terminal Function Pin No Description Current (AMPS) Resistance (mΩ) Remark 1 POS. BATTERY 2. (MOTOR) 40A 10 2 - 3 - 4 C-CAN Low 100 mA 250 5 C-CAN High 100 mA 250 6 - 7 P-CAN Low 100 mA 250 8 P-CAN High 100 mA 250 9 SENSOR REAR LEFT POWER 150 mA 250 10 SENSOR REAR RIGHT POWER 150 mA 250 11 SENSOR FRONT RIGHT POWER 150 mA 250 12 SENSOR FRONT LEFT POWER 150 mA 250 13 PUMP MOTOR GROUND 40A 10 14 - 15 CLUTCH SWITCH SIGNAL 1...
Hyundai Venue (QX) (2020-2023) Service Manual: Specifications
Specification Item Specification Power source 3V Operating temperature -10°C to +60°C (14°F to +140°F) RF Modulation FSK LF Modulation ASK RF frequency 433...
Categories
- Manuals Home
- 1st Generation Venue Owners Manual
- 1st Generation Venue Service Manual
- Vehicle Identification Number (vin), Vehicle Certification Label
- System Setting and Activation
- To set Cruise Control speed
- New on site
- Most important about car
Air bag collision sensors
WARNING
To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:
Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Do not install bumper guards or replace the bumper with a nongenuine HYUNDAI parts. This may adversely affect the collision and air bag deployment performance. Place the ignition switch in the LOCK/OFF or ACC position when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs conducted by an authorized HYUNDAI dealer.
Copyright © 2023 www.hvenueqx.com