Hyundai Venue (QX): While Driving / Forward Collision-Avoidance Assist (FCA) System-Sensor Fusion

Hyundai Venue (QX) (2020-2025) Owners Manual / While Driving / Forward Collision-Avoidance Assist (FCA) System-Sensor Fusion

Forward Collision-Avoidance Assist system is designed to help detect and monitor the vehicle ahead or detect a pedestrian (if equipped) in the roadway through front view camera recognition and front radar signals to warn the driver that a collision is imminent, and if necessary, apply emergency braking.

WARNING

Take the following precautions when using Forward Collision-avoidance Assist system:

  • This system is only a supplemental system and it is not intended to, nor does it replace the need for extreme care and attention of the driver. The sensing range and objects detectable by the sensors are limited. Pay attention to the road conditions at all times.
  • NEVER drive too fast in accordance with the road conditions or while cornering.
  • Always drive cautiously to prevent unexpected and sudden situations from occurring. Forward Collision- Avoidance system may not always stop the vehicle completely and is only intended to help mitigate a collision that is imminent.

Forward Collision-Avoidance Assist system is designed to monitor the vehicle ahead in the roadway through camera recognition to warn the driver that a collision is imminent, and if necessary, apply emergency braking.

System setting • Setting Forward Safety function The driver can activate FCA by placing the ignition switch to the ON position and by selecting: ‘User Settings → Driver Assistance → Forward Safety’ -- If you select “Active Assist”, FCA system activates.

Other information:

Hyundai Venue (QX) (2020-2025) Service Manual: Immobilizer Control Unit. Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box. (Refer to Body - "Glove Box Housing") 3. Remove the smart key unit (A) after loosening the nuts.

Hyundai Venue (QX) (2020-2025) Service Manual: A/C Pressure Transducer. Description and operation

Description The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed.

Categories

 
Copyright © 2025 www.hvenueqx.com - 0.0132