Hyundai Venue: Front Door / Front Door Outside Handle. Repair procedures
• |
When removing with a flat-tip screwdriver or remover,wrap protective
tape around the tools to preventdamage to components.
|
• |
Take care not to scratch the body surface.
|
|
1. |
Remove the plug hole (A) and loosen the outside handle mounting bolt.
Tightening torque :
7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb-ft)
|
|
2. |
Remove the front door exterior handle (A) by pushing it rearwards.
|
3. |
Press the lock pin and separate the front door outside handle connector
(A).
|
4. |
To install, reverse removal procedure.
•
|
Make sure the connector is connected properly.
|
•
|
Make sure the door locks / unlocks and opens / closes
properly.
|
•
|
Be sure to install the outside handle pad (A) between
the outside handle and the door panel.
|
|
|
Replacement
1.
Pull down the front door window glass to the lowest level by pressing
the power window glass switch...
Other information:
Replacement
•
When removing with a flat-tip screwdriver or remover,wrap protective
tape around the tools to preventdamage to components...
..
Categories
This gauge indicates the approximate amount of fuel remaining in the fuel tank.
Information
The fuel tank capacity is given in chapter 2.
The fuel gauge is supplemented by a low fuel warning light, which will
illuminate when the fuel tank is nearly empty.
On inclines or curves, the fuel gauge pointer may fluctuate or the low
fuel warning light may come on earlier than usual due to the movement of fuel
in the tank.
read more