Hyundai Venue: Automatic Transaxle Control System / Input Speed Sensor. Specifications

Hyundai Venue (QX) (2020-2025) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Input Speed Sensor. Specifications

Specifications

▷ Type : Hall effect sensor

▷ Specifications

Items		Specifications
Operation condition [°C(°F)]		(-40 to 150) -40 to 302
Output voltage(V)	High	1.18 - 1.68
	Low	0.59 - 0.84

Input Speed Sensor. Description and operation

Description Input speed sensor is a vital unit that measures the rate of rotation of the input shaft inside the transaxle and delivers the readings to the TCM...

Input Speed Sensor. Repair procedures

Removal • When Diagnostic Trouble Codes (DTC) is on, perform the following procedure to replace it...

Other information:

Hyundai Venue (QX) (2020-2025) Service Manual: Description and operation

Function No Item Description 1 Washer Linked Wiper – If the washer switch is pressed ON for 0.06 second with the vehicle mode in IGN2, the wiper relay is turned ON after washer switch ON, and then the wiper relay is turned OFF after wiper parking signal ON...

Hyundai Venue (QX) (2020-2025) Service Manual: Variable Intake Solenoid (VIS) Valve. Description and operation

Description Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold. The VIS valve controls the vacuum modulator which activates a valve in the intake manifold. The ECM opens or closes this valve according to engine condition (Refer to below table)...

Categories

Air bag collision sensors

WARNING

To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Do not install bumper guards or replace the bumper with a nongenuine HYUNDAI parts. This may adversely affect the collision and air bag deployment performance. Place the ignition switch in the LOCK/OFF or ACC position when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs conducted by an authorized HYUNDAI dealer.

Hyundai Venue. Air bag collision sensors