Hyundai Venue: Manual Transaxle System / Manual Transaxle Control System

Hyundai Venue (QX) (2020-2025) Service Manual / Manual Transaxle System / Manual Transaxle Control System

Back-up Lamp Switch. Repair procedures

Inspection 1. Turn OFF ignition switch and disconnect the negative (-) battery cable. 2. Remove the air cleaner and air duct...

Shift Lever. Components and components location

Components 1. Shift lever knob & boots 2. Shift lever assembly 3. Select cable 4. Shift cable 5. Retainer 6...

Other information:

Hyundai Venue (QX) (2020-2025) Service Manual: Auto Light Sensor. Repair procedures


Inspection In the state of IGN1 ON, when the multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor's input. If IGN1 ON, The BCM monitors the range of this supply and raises up a failure as soon as the supply’s voltage is out of range...

Hyundai Venue (QX) (2020-2025) Service Manual: Cooling Fan. Repair procedures


Removal and Installation Cooling Fan Assembly 1. Disconnect the battery negative terminal. 2. Remove the air duct. (Refer to Intake and Exhaust System - "Air Cleaner") 3...

Categories

Master warning mode

Hyundai Venue. Master warning mode

This warning light informs the driver the following situations.

-- Forward Collision-Avoidance Assist system malfunction (if equipped)
-- Forward Collision-Avoidance Assist radar blocked (if equipped)
-- Blind-Spot Collision Warning system malfunction (if equipped)
-- Blind-Spot Collision Warning radar blocked (if equipped)
-- Lamp malfunction (if equipped)
-- High Beam Assist malfunction (if equipped)
-- Tire Pressure Monitoring System (TPMS) malfunction (if equipped)

read more


 
Copyright © 2025 www.hvenueqx.com