Hyundai Venue: Speedometer & Tachometer / Outside temperature gauge

Hyundai Venue (QX) (2020-2024) Owners Manual / Instrument Cluster / Gauges and Meters / Speedometer & Tachometer / Outside temperature gauge

Hyundai Venue. Outside temperature gauge

This gauge indicates the current outside air temperature by 1°F (1°C).

-- Temperature range: -40°F ~ 140°F (40°C ~ 60°C)

Note that the temperature indicated on the LCD display may not change as quickly as the outside temperature (there may be a slight delay before the temperature changes.)

You can change the temperature unit from °F to °C or °C to °F in the User Settings mode in the cluster:

-- Go to User Settings Mode → Other → Temperature Unit.

For vehicles equipped with Automatic Climate Control, you can also:

-- Press and hold the AUTO and OFF buttons on the climate control unit for 3 seconds

Both the temperature unit on the cluster LCD display and climate control screen will change.

    Fuel gauge

    This gauge indicates the approximate amount of fuel remaining in the fuel tank. Information The fuel tank capacity is given in chapter 2. The fuel gauge is supplemented by a low fuel warning light, which will illuminate when the fuel tank is nearly empty...

    Odometer & Range

    Odometer The odometer indicates the total distance that the vehicle has been driven and should be used to determine when periodic maintenance should be performed...

    Other information:

    Hyundai Venue (QX) (2020-2024) Service Manual: Troubleshooting


    Troubleshooting Problem Symptoms Table Use the table below to help you find the cause of theproblem. The numbers indicate the priority of the likecause of the problem. Check each part in order. If necessary, replace these parts...

    Hyundai Venue (QX) (2020-2024) Service Manual: Floor Console Assembly. Repair procedures


    Replacement    • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...

    Categories

    Air bag collision sensors

    WARNING

    To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

    Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Do not install bumper guards or replace the bumper with a nongenuine HYUNDAI parts. This may adversely affect the collision and air bag deployment performance. Place the ignition switch in the LOCK/OFF or ACC position when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs conducted by an authorized HYUNDAI dealer.

    Hyundai Venue. Air bag collision sensors

    read more


     
    Copyright © 2024 www.hvenueqx.com