Hyundai Venue (QX): Hydraulic System / 35R Clutch Control Solenoid Valve (35R/C_VFS). Specifications
| Specifications |
|
Shape |
Items |
Specifications |
|
|
Control current (voltage) [mA] |
0 - 1100 |
|
Supply pressure [kpa (kgf/cm², psi)] |
1569.06 (16, 227.57) |
|
|
Control pressure [kpa (kgf/cm², psi)] |
0 - 1569.06 (0 - 16, 0 - 227.57) |
|
| Internal
resistance(Ω) |
5.0 - 5.6 |
Description • 35R Clutch control solenoid valve(35R/C) is attached to the valve body. • This variable force solenoid valve directly controls the hydraulic pressure inside the 35R clutch.
Component Location (1)_Valve Body Cover 1. Valve Body Cover 2. Valve Body Cover Gasket 3. Solenoid Valve Connector Component Location (2)_Solenoid Valve 1.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: ESCL(Electronic Steering Column Lock). Repair procedures
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the steering column upper and lower shrouds.
Hyundai Venue (QX) (2020-2026) Service Manual: Temperature Control Actuator. Description and operation
Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Repair procedures
- General Information
- Engine Control / Fuel System
- New on site
- Most important about car
