Hyundai Venue (QX): Hydraulic System / 35R Clutch Control Solenoid Valve (35R/C_VFS). Description and operation

Hyundai Venue (QX) (2020-2026) Service Manual / Automatic Transaxle System\ / Hydraulic System / 35R Clutch Control Solenoid Valve (35R/C_VFS). Description and operation

Description
•
35R Clutch control solenoid valve(35R/C) is attached to the valve body.
•
This variable force solenoid valve directly controls the hydraulic pressure inside the 35R clutch.

Hyundai Venue. 35R Clutch Control Solenoid Valve (35R/C_VFS). Description and operation

    Inspection    • Refer to the DTC manual for the check procedure.

    Specifications Shape Items Specifications Control current (voltage) [mA] 0 - 1100 Supply pressure [kpa (kgf/cm², psi)] 1569.

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: Receiver-Drier. Repair procedures

    Replacement 1. Remove the condenser. 2. Remove the cap (A) on the bottom of the condenser with a L wrench. Tightening torque : 9.81 - 14.71 N.m (1.

    Hyundai Venue (QX) (2020-2026) Service Manual: Temperature Control Actuator. Description and operation

    Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch.

    Categories

     
    Copyright © 2026 www.hvenueqx.com - 0.0109