| Removal and Installation |
| 1. |
Remove the engine cover.
(Refer to Engine and Transaxle Assembly - "Engine Cover")
|
| 2. |
Disconnect the battery negative terminal.
|
| 3. |
Remove the air duct and air cleaner assembly.
|
| 4. |
Install in the reverse order of removal.
|
| 1. |
Open the air cleaner cover by unhooking the clamps.
|
| 2. |
Replace the air cleaner element (A) with a new one.
|
| 3. |
Close the air cleaner cover by hooking the clamps.
|
Removal and Installation 1. Disconnect the battery "-" terminal. 2. Disconnect the Variable Intake Solinoid(VIS) conncetor(A).
Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch.
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front view camera cover (A). 3. Separate the front view camera connector (A). 4.