Hyundai Venue (QX): Intake And Exhaust System / Variable Intake Solenoid(VIS) Actuator. Repair procedures

Hyundai Venue (QX) (2020-2026) Service Manual / Engine Mechanical System / Intake And Exhaust System / Variable Intake Solenoid(VIS) Actuator. Repair procedures

Removal and Installation
1.
Disconnect the battery "-" terminal.
2.
Disconnect the Variable Intake Solinoid(VIS) conncetor(A).

Hyundai Venue. Variable Intake Solenoid(VIS) Actuator. Repair procedures
3.
Disconnect the lever (A) and hose (B).
4.
Loosen the mounting bolts and then remove the Variable Intake Solinoid(VIS) actuator (C).
Tightening torque :
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)

Hyundai Venue. Variable Intake Solenoid(VIS) Actuator. Repair procedures

    Removal and Installation 1. Remove the engine cover. (Refer to Engine and Transaxle Assembly - "Engine Cover") 2.

    Components 1. Intake manifold 2. Intake manifold gasket 3. Electronic throttle body gasket 4. Electronic throttle body 5.

    Other information:

    Hyundai Venue (QX) (2020-2026) Service Manual: PTC Heater. Repair procedures

    Inspection Operating Logic Test (Manual only) Inspect the PTC operation by confirmation logic as follows; 1. Entering (1) Set the Floor mode and maximum heating position. (2) Turn off the blower switch.

    Hyundai Venue (QX) (2020-2026) Service Manual: Climate Control Air Filter. Repair procedures

    Replacement 1. Open the glove box. 2. Press both sides of the glove box (A) and take it out. 3. Remove the filter cover (A) by pressing the knob. 4.

    Categories

     
    Copyright В© 2026 www.hvenueqx.com - 0.0112