| Specification |
|
Item |
Specification |
|
Current voltage |
13V |
|
Working voltage |
DC 10V - 15V |
|
Working temperature |
(-)30°C ~ (+)100°C |
|
Voltage drop |
Max. 0.4 V |
Description Back up lamp switch is pushed by the reverse lug sliding when select arm, and switches the back up lamp.
Inspection 1. Turn OFF ignition switch and disconnect the negative (-) battery cable. 2. Remove the air cleaner and air duct.
Description The compressor is the power unit of the A/C system. It is located on the side of engine block and driven by a V-belt of the engine. The compressor changes low pressure and low temperature refrigerant gas into high pressure and high temperature refrigerant gas.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. Measure the resistance between terminal "+" and "-" of the evaporator temperature sensor.