| Description |

General Information 1. Check & Change intervals Check & Replenishment Change Capacity Oil specification Normal use Severe Use 60,000 km / 4 years (40,000 miles / 4years) No service required 120,000 km (80,000 miles) 1.
Specification Item Specification Current voltage 13V Working voltage DC 10V - 15V Working temperature (-)30°C ~ (+)100°C Voltage drop Max.
Inspection The following section describes how to diagnose faults using a diagnostic instrument. 1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel, and turn on the GDS.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the temperature control actuator operates to the cool position when connecting 12V to terminal 3 and grounding terminal 7.