| Component Location |

| 1. Hood switch 2. Integrated Body Control Unit (IBU) 3. Door lock / unlock buzzer |
4. Front door lock actuator &
switch 5. Rear door lock actuator & switch |
Specification Item Specification Power source 3V Operating temperature -10°C to +60°C (14°F to +140°F) RF Modulation FSK LF Modulation ASK RF frequency 433.
Description Burglar Alarm State [B/A State] B/A State Description DISARM 1) In "DISARM" state, no vehicle start inhibition.
Inspection The following section describes how to diagnose faults using a diagnostic instrument. 1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel, and turn on the GDS.
Replacement 1. Remove the heater unit assembly. (Refer to Heater - "Heater Unit") 2. Loosen the mounting screws and remove the heater core cover (A). 3.