| Components |

| 1. Passenger Air Bag (PAB) |
Description The passenger airbag (PAB) is installed inside the crash pad and protects the front passenger in the event of a frontal crash.
Removal 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.
Removal lf replacement of the rear corner radar unit bracket or extension wire is required, replace the defective part only with a new one. 1.