Hyundai Venue (QX): Restraint
- General information
- Specifications
- Special service tools
- General safety information and caution
- Description and operation
- Repair procedures
- SRSCM
- Components and components location
- Schematic diagrams
- SRS Control Module (SRSCM). Description and operation
- SRS Control Module (SRSCM). Components and components location
- SRS Control Module (SRSCM). Repair procedures
- Front Impact Sensor (FIS). Description and operation
- Front Impact Sensor (FIS). Components and components location
- Front Impact Sensor (FIS). Repair procedures
- Side Impact Sensor (SIS). Description and operation
- Side Impact Sensor (SIS). Components and components location
- Side Impact Sensor (SIS). Repair procedures
- Airbag Module
- Driver Airbag (DAB) Module and Clock Spring. Description and operation
- Driver Airbag (DAB) Module and Clock Spring. Components and components location
- Driver Airbag (DAB) Module and Clock Spring. Repair procedures
- Passenger Airbag (PAB) Module
- Description and operation
- Components and components location
- Repair procedures
- Side Airbag (SAB) Module. Description and operation
- Side Airbag (SAB) Module. Components and components location
- Side Airbag (SAB) Module. Repair procedures
- Curtain Airbag (CAB) Module. Description and operation
- Curtain Airbag (CAB) Module. Components and components location
- Curtain Airbag (CAB) Module. Repair procedures
- Airbag Module Disposal. Description and operation
- Seat Belt Pretensioner (BPT)
Removal 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2.
General Information The supplemental restraint system (SRS) is designed to supplement the seat belt to help reduce the risk or severity of injury to the driver and passenger by activating and deploying the driver, passenger, side airbag and belt pretensioner in certain frontal or side collisions.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Evaporator Temperature Sensor. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. Measure the resistance between terminal "+" and "-" of the evaporator temperature sensor.
Hyundai Venue (QX) (2020-2026) Service Manual: Mode Control Actuator. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Trip Computer
- Electronic Stability Control (ESC)
- Maintenance
- New on site
- Most important about car
