| Components |

| 1. Front door trim 2. Front door module 3. Front door quadrant inner cover 4. Front door hinge |
5. Front door inside weatherstrip 6. Front door outside weatherstrip 7. Front door body side weatherstrip 8. Front door side weatherstrip |
Adjustment Glass Adjustment • Check the glass run channel for damage or deterioration, and replace it if necessary.
Inspection 1. Check the resistance of the ambient temperature sensor between terminals 1 and 2 whether it changes by changing the ambient temperature. 1. Ambient Sensor (+) 2.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the temperature control actuator operates to the cool position when connecting 12V to terminal 3 and grounding terminal 7.