Replacement 1. Open the fuel filler cap (A) 2. Loosen the mounting bolts and remove the fuel filler door (A).
Components 1. Front door trim 2. Front door module 3. Front door quadrant inner cover 4. Front door hinge 5.
Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.
Removal 1. Remove the bumper cover. (Refer to Body - "Front Bumper Cover") 2. Disconnect the connector (A) from the PDW sensor. [L - Type] Installation 1.