| Components |

| 1. Rear door trim 2. Rear door module 3. Rear door hinge 4. Rear door inside weatherstrip |
5. Rear door outside weatherstrip 6. Rear door body side weatherstrip 7. Rear door side weatherstrip |
Adjustment Glass Adjustment • Check the glass run channel for damage or deterioration, and replace it if necessary.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.