| Component Location |

| 1. Rear bumper cover 2. Rear bumper side bracket [LH] |
3. Rear bumper side bracket [RH] |
Component Location 1. Rear bumper cover
Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch.
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer to Body - "Front door trim") 3. Disconnect the power door mirror connector from the harness 4.