| Components |

| 1. Cylinder
head assembly 2. Mechanical Lash Adjuster (MLA) 3. Retainer lock 4. Retainer 5. Valve stem seal 6. Valve spring |
7. Valve
spring seat 8. Oil Control Valve (OCV) 9. Exhaust valve 10. Intake valve 11. Cylinder head gasket 12. Camshaaft position sensor |
Components 1. Exhaust camshaft 2. Intake camshaft 3. Exhaust CVVT 4. Intake CVVT 5. Camshaft bearing cap 6.
Removal Engine removal is not required for this procedure. • Use Fender cover to avoid damaging painted surfaces.
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the steering column upper and lower shroud panel.
Description Rear view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position. This system is a supplemental system that shows behind the vehicle through the AV monitor or the ECM (Reverse Display Room Mirror) mirror while backing-up.