Hyundai Venue (QX): Engine Mechanical System / Cylinder Head Assembly
- Repair procedures
- Components and components location
- Cylinder Head Cover. Components and components location
- Cylinder Head Cover. Repair procedures
- CVVT & Camshaft. Components and components location
- Cylinder Head. Components and components location
- Cylinder Head. Repair procedures
Removal 1. Turn the crankshaft pulley clockwise, and align its groove with the timing mark of the timing chain cover.
Adjustment Valve Clearance Inspection and Adjustment • Inspect and adjust the valve clearance when the engine is cold (Engine coolant temperature : 20°C) and cylinder head is installed on the cylinder block.
Other information:
Hyundai Venue (QX) (2020-2026) Service Manual: Components and components location
Component Location [Engine Room] 1. Condenser 2. Discharge hose 3. Suction & Liquid tube assembly 4. Compressor 5. Service port (High pressure) 6. A/C Pressure transducer (APT) 7. Service port (Low pressure) 8.
Hyundai Venue (QX) (2020-2026) Service Manual: Intake Actuator. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.
Categories
- Manuals Home
- Hyundai Venue Owners Manual
- Hyundai Venue Service Manual
- Child-Protector Rear Door Locks
- Rear Seat Assembly. Repair procedures
- Engine Electrical System
- New on site
- Most important about car
